6 WHEELCHAIR OPERATION
6.7
Installing/Removing Elevating Legrests
MyOn and MyOn Active
Installing
1.
Place elevating legrest (A) on the outside of the wheelchair and insert mounting pin (B) of the legrest into the mounting tube (C) of the wheelchair.
2.
Rotate elevating legrest toward the inside of the wheelchair until it locks in place.
The calfpad (D) of the legrest will be on the inside of the wheelchair when locked in place.
3.
Repeat STEPS 1-3 for the other elevating legrest assembly.
FIGURE 14
™
MyOn
Active MyOn MyOn Jr
A
B
Installing/Removing Elevating Legrests - MyOn and MyOn Active - Installing
46
C
D
Part No 1167417