Invacare MyOn User Manual page 34

5 SAFETY INSPECTION
❑
Adjustable height arms operate and lock securely.
❑ Armrest pad sits flush against arm tube.
❑ All fasteners on clothing guards are secure.
❑ Seat and/or back upholstery have no rips.
❑ Inspect adjustable angle back attaching hardware is securely tightened.
❑ No excessive side movement or binding when rear wheels are lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling finish.
❑ Inspect tires/casters for flat spots and wear.
❑ Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
❑ Wheel lock pivot point are free of wear and looseness.
❑
Clean upholstery and armrests with mild soap and water.
❑
Sealed bearings and axle nut tension are correct.
❑
Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Wheel bearings are clean and free of moisture.
❑ Wheel locks are easy to engage.
❑ Clean quick-release axles with a Teflon lubricant.
❑ Ensure axles are free from dirt, lint, etc.
❑ Ensure roller bearings are free from dirt, lint, etc.
❑ Adjust wheel locks as tires wear.
❑ Clean and wax all parts.
❑ Ensure casters are free of debris.
❑
Clean upholstery and armrests with mild soap and water.
❑
Check that all labels are present and legible. Replace if necessary.
™
MyOn Active MyOn MyOn Jr
34
Part No 1167417