Invacare MyOn User Manual page 32

5 SAFETY INSPECTION
❑ Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
CAUTION
As with any vehicle, the wheels/casters and tires should be checked periodically for cracks, flat spots and wear, and should
be replaced.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Wheel bearings are clean and free of moisture.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Wheel locks do not interfere with tires when rolling.
❑ Wheel lock pivot point are free of wear and looseness.
❑
Wheel locks are easy to engage.
❑
Inspect tires/casters for flat spots and wear.
❑ Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
CAUTION
DO NOT use WD-40®, 3-in-1 Oil®, or other penetrating lubricants on quick-release axles. Otherwise, binding and/or
damage to the wheelchair may occur.
❑ Clean quick-release axles with a Teflon
❑ Ensure axles are free from dirt, lint, etc.
❑ Ensure roller bearings are free from dirt, lint, etc.
❑ Adjust wheel locks as tires wear.
❑
Clean and wax all parts.
❑
Clean upholstery and armrests with mild soap and water.
❑
Ensure casters are free of debris.
❑
Clean upholstery and armrests with mild soap and water.
❑ Check that all labels are present and legible. Replace if necessary.
™
MyOn Active MyOn MyOn Jr
®
lubricant.
32
Part No 1167417