Invacare MyOn User Manual page 79

10.6 Adjusting the Back Angle
1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 81.
2. If equipped with flip back armrests, remove the flip back armrests. Refer to Removing/Installing Flipback Armrests on page 68.
3. Loosen mounting screw (A) and then mounting screw (B).
 Back angle adjustment range (C) is 6° forward and 15° back.
Use the indent (D) as the angle indicator when rotating the back cane.
4. Rotate the back cane (E) to desired angle.
5. Retighten mounting screw (B) and then mounting screw (A).

Back canes MUST be adjusted to same back angle.
6. Repeat STEPS 1-5 for remaining back cane.
Part No 1167417
E
A
C
0
FIGURE 6 Adjusting the Back Angle
79
B
D
MyOn
10 SEAT/BACK
™
Active MyOn MyOn Jr