What To Do If Your Appliance Does Not Work - TEFAL Ultrablend Cook + Manual

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?

Problems
Appliance does not
work
The appliance stopped
while in use
Excessive vibrations
Leak or overflow from
the lid
Causes
The plug is not connected.
The blender jug is not positioned
correctly on the motor unit or
the jug and lid are correctly in
place and are not locked onto the
motor unit.
Appliance, keypad or program
not responding
In case of overheating
Overflowing
Overload or overheating
The product is not placed on a
flat surface.
Volume of ingredients is too high.
The silicon gasket (D) is missing
or not correctly positioned.
Volume of ingredients is too high.
The lid is not correctly positioned.
Solutions
Connect the appliance to a
socket with the same voltage as
indicated on the rating plate of
the appliance.
Check that the blender jug and
the lid are positioned properly
on the motor unit as explained in
the instructions.
Unplug the appliance, wait for 1
minute and plug in again.
Switch the appliance off using
the start/stop button, unplug
and leave it to cool down for
approx.15-20 minutes.
Reduce the quantity of the
ingredients processed.
Switch the appliance off using
the start/stop button, unplug
and leave it to cool down for
approx.15-20 minutes.
Reconnect the appliance to
the power supply and resume
blending.
Place the appliance on a flat
surface.
Reduce the quantity of
ingredients processed.
Place the silicone gasket
correctly on the motor unit.
Reduce the quantity of
ingredients processed.
Place the lid correctly on the
blender jug.
EN
79