Other Functions - TEFAL Ultrablend Cook + Manual

• Heat : allows to freely control the way you want to heat. Press the
heat button, the screen indicates « 60 » but you can choose the
heating temperature from 40° up to 100° by pressing the setting
+/- buttons (M). You can set up the operating time by pressing the
setting +/- buttons (M) between 5 minutes and 90 minutes.
The remaining time appears on the screen. Wait for the blender to stop
automatically. The appliance beeps 5 times at the end of the program.
You can also stop the blending during the cycle :
– within 1 minute of working, press the start/stop button
– more than 1 minute of working, press and hold the start/stop button
for 3 seconds

OTHER FUNCTIONS

• Start/Stop : allows to stop any manual setting or automatic
program before the end by pressing this button.
You can also stop the blending during the cycle :
– within 1 minute of working, press the start/stop button
– more than 1 minute of working, press and hold the start/stop button
for 3 seconds
Overload protection
• The appliance is equipped with overload protection. This prevents the
motor from being damaged by overloading.
If the appliance switches off during operation, proceed as follows :
– Switch the appliance off using the start/stop button, unplug and leave it
to cool down for approximately 15-20 minutes.
– Reconnect the appliance to the power supply and resume blending.
EN
77