Using Your Appliance; Automatic Function - TEFAL Ultrablend Cook + Manual

USING YOUR APPLIANCE

• Put the appliance on a flat, stable, heat-resistant surface away from
sources of heat or water splashes.
• Make sure the silicone gasket (D) is in place on the motor unit (E).
Position the jug (C) correctly on the motor unit.
• Add the ingredients into the jug without exceeding the maximum level
indicated:
–
1750 ml max for cold preparation
–
1400 ml max for hot preparation

AUTOMATIC FUNCTION:

How to use :
• Lock the lid on the jug and place the lid cap in position on the lid and
lock it by rotating it. The appliance only starts up once the jug and lid
are correctly in place.
• Plug in the blender. The product makes a beep and the screen lights up.
• The product will immediately in standby mode. At this stage, you can
select a program by pressing the button «mode»(I). The LED will turn on
on the selected program. The recipe time information will be displayed.
For hot programs, please note that the time indicated does not take into
account the pre-heating time needed which may vary according to the
initial temperature and quantity of your ingredients (between 5 and 15
minutes).
• Press the start/stop button. Then the appliance starts to work
automatically.
• The pre-heat animation appears on the display during pre-heating time
for hot recipes (except for "hot sauce" program).
Example:
Once the pre-heating phase is completed, the recipe cooking time
countdown will start.
74