What To Do If Your Appliance Does Not Work - TEFAL BL233838 Manual

What to do if your appliance does not work?

Problems
The product does not
work.
The product stops while
in use.
Excessive vibrations.
Leak from the lid.
Leak at the bottom of
the jug.
The blade does not turn
easily.
Causes
The plug is not connected.
The jug or accessory is not
correctly positioned or locked
on the motor unit.
The blade unit (D1) is not
correctly attached to the
jug (D4).
Overload of ingredients
(activation of electronic
motor safety device).
The product is not placed on
a flat surface.
Volume of ingredients is
too high.
Volume of ingredients is
too high.
The lid is not correctly
positioned.
The seal (D5) is not well
placed on the lid.
The blade unit (D1) is not
properly or securely locked
on the jug (D4).
Pieces of food too large or
too hard.
68
Solutions
Connect the appliance to
a socket with the same
voltage.
Check that the jug or
accessories are correctly
positioned and locked on the
motor unit as shown in the
instructions. You must hear
a double "click".
Unlock the blade unit (D1)
and bolt it to the jug (D4)
(fig. 1a, 1b, 1c) once again.
In this case, unplug the
product, put the button back
to 0 position and let it cool
down for a minimum of 30
minutes.
Place the product on a flat
surface.
Reduce the quantity of
ingredients processed.
Reduce the quantity of
ingredients processed.
Lock the lid correctly on the
blender jug.
Place the seal (D5) correctly
on the lid (D6) (fig. 2a).
Place the blade unit correctly
on the jug; you must hear
a click.
The button (D2) must be
fully aligned with the blade
unit (D1).
Reduce the size or quantity
of ingredients processed.
Add liquid.