Table of Contents
Advertisement
Zipper insertion
Gathering
- Attach the zipper foot. Attach the
right side of the presser foot pin to the
holder when sewing the left side of
the zipper. Attach the left side of the
presser foot pin to the presser foot
holder when sewing the right side of
the zipper.
- Sew the zipper to the piece of fabric
with the extra 3 mm (1/8 inch),
starting from the base of the zipper.
When you are about 5 cm (2 inches)
from the end of the zipper, stop the
sewing machine with the needle
lowered (in the fabric), raise the
presser foot lever, and then open the
zipper and continue sewing.
- Turn the fabric right side out, stitch
across the lower end and the right
side of the zipper.
- Stop about 5cm (2 inches) from the
top of the zipper. Remove the basting
and open the zipper. Stitch the
remaining of the seam.
Set the Pattern Selector as illustrated.
1.
Attach the gathering foot
2.
Sew a single row or multiple rows of straight stitches.
3.
If more gathering in required, loosen the upper
thread (to about 2) so that the lower thread lies on
the under side of the material.
4.
Pull the lower thread to gather more of the material.
35
Advertisement
Table of Contents
