Supported Traps - Alvarion BreezeNET PRO.11 Series User Manual

Wireless networking product
Hide thumbs Also See for BreezeNET PRO.11 Series:
Table of Contents

Advertisement

Appendix

9.1.2 Supported Traps

The following traps are implemented by BreezeNET PRO.11 units. All BreezeNET
PRO.11 units that have the SNMP Traps parameter enabled will send traps to the
network's designated managers. The traps can be viewed and filtered using
SNMPc.
To enable/disable trap sending for a device, use the IP and SNMP Parameters
menu (see Section 3.4.2).
The following table lists the traps implemented by BreezeCOM PRO.11 units:
Trap
brzAProamingIn
BrzAPassociated
BrzAPdisassociated
BrzAPaging
BrzAProamedout
BrzSTAassociated
BrzWlanStatus
User's Guide
Variables
brzTrapSTAMacAddr
brzTrapSTAMacAddr
brzTrapSTAMacAddr
brzTrapSTAMacAddr
brzTrapSTAMacAddr
brzLastAPMacAddr
brzTrapAPMac
brzTrapLastRssiQual
itybrzTrapRssiQualit
y
brzTrapToggle
brzTrapMacAddress
9-2
Description
A station has roamed into this AP coverage area.
The trap contains the MAC address of the
associated station.
A new station is associated with this AP. The trap
contains the MAC address of the associated station.
A station has disassociated itself from this AP. The
trap contains the MAC address of the associated
station.
A station association was aged out and removed
from this AP. The trap contains the MAC address of
the aged-out station.
A station has roamed out of this AP's range. The
trap contains the MAC address of the station that
roamed out.
A station has become associated with, or roamed to,
a new AP. The trap contains the MAC address and
average RSSI level of the new AP ( TrapAPMac and
TrapRssiQuality variables). If the station has been
roaming, the MAC address of the old AP and the
RSSI level prior to roaming are also provided
( LastAPMacAddr and LastRssiQuality variables).
For an association, the second address appears as
all zeros.
The wireless media condition has changed. An ON
value is sent when the wireless LAN quality for a
station or AP drops below the WLAN trap threshold.
An OFF value is sent if the quality improves beyond
the threshold. The current value of wireless LAN
quality is also sent.
BreezeNET PRO.11 Series

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents