Advertisement
Available languages
Available languages
Secure the workpiece. A workpiece
clamped with clamping devices or in a
vice is held more secure than by hand.
Keep your workplace clean.
Blends of materials are particularly
dangerous. Dust from light alloys can
burn or explode.
Always wait until the machine has
come to a complete stop before
placing it down. The tool insert can
jam and lead to loss of control over
the power tool.
Avoid unintentional switching on.
Ensure the trigger is in the off position
before inserting battery pack. Carrying
the power tool with your finger on the
trigger or inserting the battery pack
into power tools that have the switch
on invites accidents.
Safety Warnings for battery
chargers
For indoor use only.
Double insulated.
Keep the battery charger away
from rain or moisture. Penetration of
water in the battery charger increases
the risk of an electric shock.
Do not charge other batteries.
The battery charger is suitable only
for charging the batteries that were
supplied with your power tool.
Otherwise there is danger of fire and
explosion.
Keep the battery charger clean.
Contamination can lead to danger of
an electric shock.
Before each use, check the battery
charger, cable and plug. If damage
is detected, do not use the battery
charger. Never open the battery
charger yourself. Have repairs
performed only by a qualified
technician. Damaged battery
chargers, cables and plugs increase
the risk of an electric shock.
Do not operate the battery charger
on easily inflammable surfaces
(e. g., paper, textiles, etc.) or
surroundings. The heating of the
battery charger during the charging
process can pose a fire hazard.
Children should be supervised to
ensure that they do not play with
the battery charger.
Products sold in GB only: Your
product is fitted with an BS 1363/A
approved electric plug with internal
fuse (ASTA approved to BS 1362). If the
plug is not suitable for your socket
outlets, it should be cut off and an
8
Advertisement
