Related Manuals for Landoll 2225
Summarization of Contents
Warranty
Manufacturer's Guarantee Policy
Details Landoll Corporation's warranty policy for new and unused machines, covering defects in material and workmanship.
Safety Precautions
Safety Symbol Definitions
Explains the meaning of DANGER, WARNING, and CAUTION symbols to avoid injury or death.
Introduction
Manual Structure Overview
Provides a guide to the manual's sections, including introduction, specifications, assembly, operation, and troubleshooting.
Standard Specifications
Model Specifications Table
Lists various Landoll Disc Chisel models with their working width, transport width, shank and disc counts, and weight.
Model Number Coding
Explains the structure and meaning of the Landoll Disc Chisel model numbers.
General Torque Specifications
SAE (UNC) Fastener Torque
Provides tightening torques for UNC fasteners in various SAE grades and sizes.
Metric Fastener Torque
Details standard torque specifications for metric fasteners, including Newton-Meters and Foot-Pounds.
Hydraulic Fitting Torque Specifications
Parker Brand Hydraulic Fitting Torques
Specifies torque values for Parker brand 37° JIC, O-Ring (ORS), and O-Ring Boss (ORB) fittings.
Aeroquip Brand Hydraulic Fitting Torques
Lists torque specifications for Aeroquip brand 37° JIC, O-Ring (ORS), and O-Ring Boss (ORB) fittings.
Assembly Instructions
General Assembly Guidelines
Emphasizes proper assembly, adjustment, and lubrication before use, including safety precautions and bolt tightening.
Assembly Safety Warnings
Highlights critical safety points such as handling sharp disc blades and preventing accidental lowering of equipment.
Frame Assembly (2225 & 2227)
Details frame assembly for both 2225 and 2227 models, covering placement, leveling, and extensions.
Rockshaft Installation (2225)
Step-by-step guide for installing the rockshaft, bearings, and gauge wheel cylinders for the 2225 model.
Rockshaft Installation (2227)
Detailed instructions for installing the rockshaft, bearings, and gauge wheel cylinders on the 2227 model.
2225 Hydraulic Plumbing Installation
Guides the installation of hydraulic hoses and manifold for the 2225 model, specifying connections and routing.
2227 Hydraulic Plumbing Installation
Details the hydraulic hose and manifold installation for the 2227 model, including connections and tie-wrap securing.
Pull Hitch Installation
Provides instructions for installing the pull hitch, including linkage, radius rods, and hydraulic connections.
Disc Gang Installation
Explains the process for installing front and rear disc gangs, including pivot blocks and angle adjustments.
Disc Gang Hydraulic Adjustment/Installation
Covers hydraulic cylinder and radius rod installation for disc gang adjustment and proper operation.
Spring Cushion Clamp Installation
Details the installation of spring cushion clamps and shanks, including shovel orientation and tightening.
Decal Installation
Guides the placement of safety and identification decals on the machine, specifying red and amber reflector placement.
Warning Lights Installation
Provides instructions for assembling and installing warning lights and wiring harnesses for visibility.
Lubrication
Details lubrication requirements before first use and at regular intervals with multi-purpose grease.
Operation and Maintenance
General Operation Safety
Highlights critical safety warnings for operating the Disc Chisel, including no riding, sharp blades, and transport lockouts.
Tractor Preparation
Outlines necessary tractor preparations, such as hitch type, tire inflation, ballast, and drawbar locking.
Disc Chisel Preparation
Details pre-operation checks for the Disc Chisel, including parts inspection, bolt tightness, tire inflation, and scraper clearance.
Attaching to Tractor
Explains the procedure for connecting the Disc Chisel to the tractor, including hydraulic coupling and lockouts.
Field Operation
Covers operational procedures like removing transport locks, setting depth, leveling, and checking bolts during operation.
Wheel Bearing Maintenance
Provides procedures for checking, adjusting, and replacing wheel bearings for optimal performance.
Hydraulic Maintenance
Details checks for tractor hydraulic fluid levels and inspection of hydraulic hoses for leaks or damage.
Off-Season Storage
Outlines steps for proper storage, including cleaning, inspection, repainting, greasing, and protection from weather.
Troubleshooting Guide
Field Leveling Issues
Addresses problems with uneven field leveling, ridge formation, and soil striping, providing solutions.
Disc Gang Performance Issues
Troubleshoots issues like disc gangs stopping, plugging, or not turning, and worn disc blades.
Shank and Scraper Issues
Provides solutions for shank plugging and bent or plugged scrapers, including adjustment and assembly checks.
Need help?
Do you have a question about the 2225 and is the answer not in the manual?
Questions and answers