The T3NFP3 kit comprises of:
1. Four Near Field Probes with SMB output connectors.
2. An SMB to SMA connecting cable.
3. An SMA to N Type adaptor.
Probe
Sensing
End
If the probes are to be used with an oscilloscope
then a SMA to BNC adaptor may be required (not
supplied) since most oscilloscopes below 4 GHz
use BNC input connectors.
Near Field Probes
SMB Output Connectors
SMB(F) to SMA(M) Connecting
Cable, 100 cm
SMA to N Type Adaptor
7