Technical Maintenance; Cleaning Guide - RoboLabs ROBOPOP 60 Operating Manual

3. Technical maintenance

3.1. Cleaning guide

The purpose of technical maintenance is to keep the machine operable during
the entire service life. The recommended cleaning schedule is presented
5
below :
PROCEDURE
Outer surfaces cleaning
Sifter cleaning
Oil nozzle cleaning
Salt tube cleaning
Chamber cleaning
Sifter rollers cleaning
Corn supply tube cleaning
DISCONNECT ELECTRIC PLUG BEFORE CLEANING!
DO NOT WASH MACHINE WITH WATER!
DO NOT USE SHARP TOOLS OR ABRASIVES FOR CLEANING!
WAIT UNTIL MACHINE IS COOLED DOWN BEFORE CLEANING!
Outer surface cleaning
Clean outer surfaces of the machine by the means of dry and clean cloth; it is
allowed to use a cloth slightly damped with soap water. It is convenient to clean
the sifter by a scraper included in the delivery set. To rotate the sifter, press and
hold SIFTER button on the front panel.
Sifter cleaning
Sifter is not rigidly connected to the machine and can be taken out of the
machine. Sifter lies freely on two shafts each with couple of rubber rollers. In the
course of time, the rollers' surface may become greasy and slippery, because of
natural corn oil and dust. This may cause sifter stop and chamber clogging. To
avoid this, rollers must be cleaned as necessary. It is suitable to do with a hard
5
Period may be different. Cleaning must be done as often as required.
tm2692 Jan-20
PERIOD
Once a day
Once a day
Once a day
Once a day
Once a day
Once a month
Once a month
22