Getting Started - RoboLabs ROBOPOP 60 Operating Manual

each. Draw-out tray makes canister replacing easier. Heating elements below
compartment are provided.
Popcorn cart
Two movable carts and 200 liter bags (LDPE) are included in the delivery set.
Using two carts makes easier changing full bag for an empty one. The machine
is equipped with cart sensor tripping whenever cart is full and needed to be
replaced.
Cart sensor
The sensor trips when plastic bag in cart is full with popcorn. Once sensor is
triggered, warning message appears on the screen and audible alarm will be
given. If no action is taken, the machine will stop popping process and will be
switched to the pause mode.

1.8. Getting Started

2. Carefully unpack the machine, check delivery set and remove protective
film from all surfaces.
3. Once machine in dedicated position, lock all four swivel casters.
4. Plug machine into the mains (see section 1.4).
5. Assemble both carts provided in the delivery set.
6. Turn the machine on by pressing START button.
Check sifter operation. Press SIFTER RUN&STOP button and hold it for a
while. Sifter should rotate then. If it does not rotate evenly and extraneous
sound is heard, it means that sifter isn't aligned on the rollers. To align the sifter,
lift it with hands and place on the rollers.
tm2692 Jan-20
9