Technical Maintenance; Cleaning Guide - RoboLabs MINI ROBOPOP 25 Operating Manual

3. T
ECHNICAL MAINTENANCE

3.1. Cleaning guide

DISCONNECT THE PLUG BEFORE CLEANING!
DO NOT WASH MACHINE WITH WATER!
WAIT UNTIL MACHINE IS COOLED DOWN BEFORE
CLEANING!
DO NOT USE SHARP TOOLS OR ABRASIVES FOR
CLEANING!
The purpose of technical maintenance is to maintain the equipment in good
condition during all the lifetime and to meet fire safety rules.
The following schedule
A CTI O N
S u rfa ce cle a n in g , d u st a nd wa st e re mo va l
S if te r cle an in g (h u sk, po pco rn re mo va l)
Th e cha mb e r clea n ing (h u sk, co rn d u st , un -p op pe d co rn re mo va l)
Ch a mbe r g rid clea n ing (hu sk, co rn d ust re mo va l)
O
UTER SURFACES CLEANING
Clean outer surfaces of the machine by the means of dry and clean cloth; it is
allowed to use a cloth slightly damped with soap water.
C
HAMBER CLEANING
It is necessary to clean the chamber of husk and dust once a day. To clean the
chamber, unfasten the latches which hold the door, and pull it out. After that,
3 Technical maintenance should be performed as necessary.
3 is recommended below:
Robopop 25 user manual Nov-20
PE RI O D
On ce a da y
On ce a da y
On ce a da y
On ce a mon t h
15