RoboLabs ROBOPOP 60 Operating Manual page 21

Using oil and salt
Most kinds of liquid oil without any added powder may be used.
IMPORTANT NOTE ON USING OIL!
Oil pumping rate depends on oil thickness; it is very important to
avoid oil temperature fluctuations to keep pumping rate the same.
To be sure that oil is kept at the same temperature following
conditions must be met:
1.
night
2.
3.
empty canister must be replaced in time.
The machine is intended for using with special salt only. Using common salt or
powders of other kind (e.g. cheese or sugar) may lead to salt applicator
clogging and equipment failure.
While colored oil is used, freshly made popcorn with oil and salt may have
patchy look and oily feeling. While being processed further, oil will be spread
across popcorn in even manner, and soaked into popcorn.
4
If machine is not operated (at least in Butterfly mode) for a long time, oil warmer may be
turned off.
OIL WARM switch must be at ON position all the time, even at
4
.
Oil compartment doors must be kept closed all the time.
Two oil canisters must be always kept in the compartment;
tm2692 Jan-20
21