RoboLabs ROBOPOP 60 Operating Manual page 12

Cart/Bag replacing
There are two carts for plastic bags included in the delivery set. Make sure that
you put plastic bag into each cart prior to use. Each cart is equipped with swivel
casters; it is convenient to keep empty cart close to full cart and once first cart is
full, then swiftly shift them.
Also, it is possible to give a short break to the sifter in order to replace cart or
bag. Press and hold SIFTER RUN&STOP button for 1 sec. Sifter will stop in
smooth manner. After 10 seconds its operation will be resumed automatically.
DO NOT USE PAUSE BUTTON FOR CHANGING THE CART!
Program settings adjustment
Program settings can be adjusted either before warming up stage or during
popping stage. During popping stage, press and hold sprocket icon button in the
upper right corner of the screen (see Fig.5). Parameters screen will appear. To
adjust parameters, press MODIFY button, enter password ('2325' by default),
and press ENTER. Use up and down arrow buttons to adjust parameters. Press
BACK for return; if not pressed, the settings will be saved and machine returns
back to popping mode screen automatically shortly.
Refilling ingredients
If less than 5 kg (approx.) of corn left in a hopper, 'Load corn in left (right)
hopper' message will appear on the screen. If more popcorn needs to be
processed, top up the hopper. Otherwise, ignore the message, and machine will
process the corn amount left. See "Corn Sensor Delay" setting in section 2.3.
There are no sensors for oil and salt. Refill oil and salt as necessary.
Pause mode
The purpose of pause mode is to stop popcorn production for a while, or to
switch between Butterfly and Mushroom programs. During the pause mode
oil/salt operation is suspended; the temperature in chamber is kept on the set
value.
DO NOT USE PAUSE BUTTON FOR CHANGING THE CART!
tm2692 Jan-20
12