HP E3456A User Manual page 170

Product Warranty
This Hewlett-Packard product
has a warranty against defects in
material and workmanship for a
period of one year from date of
shipment. During the warranty
period, Hewlett- Packard
Company will, at its option, either
repair or replace products that
prove to be defective.
For warranty service or repair,
this product must be returned to
a service facility designated by
Hewlett- Packard.
For products returned to Hewlett-
Packard for warranty service, the
Buyer shall prepay shipping
charges to Hewlett- Packard and
Hewlett-Packard shall pay
shipping charges to return the
product to the Buyer. However,
the Buyer shall pay all shipping
charges, duties, and taxes for
products returned to Hewlett-
Packard from another country.
Hewlett-Packard warrants that its
software and firmware designated
by Hewlett-Packard for use with
an instrument will execute its
programming instructions when
properly installed on that
instrument. Hewlett-Packard
does not warrant that the
operation of the instrument
software, or firmware will be
uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall not
apply to defects resulting from
improper or inadequate
maintenance by the Buyer,
Buyer- supplied software or
interfacing, unauthorized
modification or misuse, operation
outside of the environmental
specifications for the product, or
improper site preparation or
maintenance.
No other warranty is
expressed or implied.
Hewlett-Packard specifically
disclaims the implied
warranties of merchantability
or fitness for a particular
purpose.
Exclusive Remedies
The remedies provided herein are
the buyer's sole and exclusive
remedies. Hewlett-Packard shall
not be liable for any direct,
indirect, special, incidental, or
consequential damages, whether
based on contract, tort, or any
other legal theory.
Assistance
Product maintenance agreements
and other customer assistance
agreements are available for
Hewlett-Packard products. For
any assistance, contact your
nearest Hewlett-Packard Sales
Office.
Certification
Hewlett-Packard Company
certifies that this product met its
published specifications at the
time of shipment from the factory.
Hewlett-Packard further certifies
that its calibration measurements
are traceable to the United States
National Institute of Standards
and Technology, to the extent
allowed by the Institute's
calibration facility, and to the
calibration facilities of other
International Standards
Organization members.
About this edition
This is the Emulation for the
PowerPC MPC500 User's
Guide.
Publication number
E3456-97002, July 1998
Printed in USA.
Print history is as follows:
First edition, July 1998
New editions are complete
revisions of the manual. Many
product updates do not require
manual changes, and manual
corrections may be done without
accompanying product changes.
Therefore, do not expect a one-
to-one correspondence between
product updates and manual
updates.
UNIX is a registered trademark in
the United States and other
countries, licensed exclusively
through X/Open Company
Limited.
MPC500 Embedded PowerPC
microprocessors are products of
Motorola, Inc.