Table of Contents
Advertisement
Chapter 6: Solving Problems
If you have problems with the emulation probe/module, your first task
is to determine the source of the problem. Problems may originate in
any of the following places:
• The connection between the emulation probe/module and your debugger
(PC or UNIX workstation) or the connection between the emulation probe
and the logic analyzer.
• The emulation probe/module itself.
• The connection between the emulation probe/module and the target
interface module.
• The connection between the target interface module and the target
system.
• The target system.
You can use several means to determine the source of the problem:
• The troubleshooting guide on the next page.
• The status lights on the emulation probe/module.
• The emulation probe/module "performance verification" tests.
• The emulation probe/module's built-in "terminal interface" commands.
118
Advertisement
Table of Contents
