Omron SYSMAC CPM2B Operation Manual page 204

Connections Diagrams for Connector Terminal Blocks and Relay Terminals
1. Connecting Inputs of 32-point Board to G7TC-ID16 Relay Terminal
CN1 CN2
Connector at CPM2B
Connector at Relay
inputs: XG5M-2032-N,
Terminal: XG5M-2032-N,
XG5M-2035-N
XG5M-2035-N
Contact No. Pin No. Pin No.
* These contacts are connected in this dia-
gram to illustrate the correspondence
with the cable in 5 below. Normally, it is
not necessary to connect these contacts.
2. Connecting Inputs of 32-point Board to XW2B-20Y4 or XW2B-20Y5 Connector Terminal Conversion Unit
CN1 CN2
Connector at Terminal
Connector at CPM2B
Conversion Unit: MR-20F,
inputs: XG5M-2032-N,
MRP-20F01, MR-20FW
XG5M-2035-N
Contact No. Pin No. Pin No.
* These contacts are connected in
this diagram to illustrate the cor-
respondence with the cable in 6
below. Normally, it is not necessa-
ry to connect these contacts.
186
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
I/O symbol
Connector at CPM2B inputs
CN1
Connector at CPM2B inputs
CN1
I/O symbol
Connector at Relay Terminal
CN2
Mark
Mark
Appendix C
Mark
Connector at Terminal
Conversion Unit
CN2