Omron SYSMAC CPM2B Operation Manual page 153

Programming Console Operations
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
WRITE
Note The operands of MOV(21) can be word addresses, so the CONT/#
Key must be pressed to input a constant.
• Writing a Word Address
11. Input the second operand.
*EM
B
1
LR
Press the WRITE Key to write the instruction to Program Memory. The next
program address will be displayed.
WRITE
Note When the default display value is "000", a word address can be in-
put immediately without pressing the Shift and CH/# Keys.
12. Input the next instruction.
F
FUN
5
Press the WRITE Key to write the instruction to Program Memory.
WRITE
• Writing an Unsigned Decimal Number
13. The first operand is input as an unsigned integer.
CONT
SHIFT TR
#
Input the value of the operand from 0 to 65535.
C F
2 5
Note If an erroneous input is made, press the CLR Key to restore the sta-
tus prior to the input. Then enter the correct input.
14. Restore the hexadecimal display.
SHIFT
Note If an input is made outside of the permissible range, a buzzer will
sound and the hexadecimal display will not be displayed.
WRITE
15. The second operand is input as a signed integer.
CONT
SHIFT
#
00202 MOV DATA B
00202 MOV DATA B
A
0
LR
00203READ
NOP (000)
00203
A
0
ADB (050)
00203 ADB DATA A
00203 ADB DATA A
NOT
00203 ADB DATA A
6
00203 ADB DATA A
TR
00203 ADB DATA B
00203 ADB DATA B
TR
#+00000
Section 7-2
000
10
000
#00000
#00256
#0100
000
135