Omron SYSMAC CPM2B Operation Manual page 139

Using a Programming Console
C200HPRO27E
Different Keys
Mode Switch
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following keys are labeled differently on the CQM1-PRO01-E and the
C200H-PRO27-E, but the operation of the keys in each pair is identical.
CQM1-PRO01-E Keys
SET
RESET
Note To specify the AR Area, use SHIFT and HR Keys for the C200H-PRO27-E
and use SHIFT and AR/HR Keys for the CQM1-PRO01-E.
A shift symbol will be displayed in the upper-right corner of the screen when
the Shift Key is pressed. The shift input can be cleared by pressing the Shift
Key again.
SHIFT
The mode switch controls the CPM2B's operating mode. The key can be
removed when the switch is set to RUN or MONITOR but it cannot be
removed when the switch is set to PROGRAM.
LCD display
Mode switch
Operation keys
Cassette recorded jack
(Cannot be used with the CPM2B).
AR
HR
Section 7-1
Connecting Cables
C200H-CN222 (2 m)
C200H-CN422 (4 m)
C200H-PRO27-E Keys
HR
PLAY
SET
REC
RESET
^ Shift input
symbol
121