Table of Contents
Advertisement
Key pressed
Keys 1 9 (digits)
Key 0
Key (star)
Key # (hash)
Note: When the operating mode
key
before identification start
status of the
IDS.
6.8 Programming mode
The module enters programming mode by reading one of the two
"+" and "-"). The programming mode cannot be entered while the module is in hardware
address setting mode (for modules with HW address setting via the communication line). The
module's functionality in programming mode can be seen in pictures 4 a-d.
It is not possible to use time schedules when inserting cards in programming mode,
therefore cards are always valid. Any user inserted using a programming card has a default
PIN set to 12345.
If the reader module's keypad is set as a code keypad, the programming mode can be
entered by entering the right code at the keypad. It is also possible to insert cards using a
keypad on modules with a code keypad.
Keypad configuration
PIN / ID keypad
Digits 1 9
Digit 0
Digits input cancel
Input submit (enter)
"Standard with IDS
is interpreted as
request for changing the armed/disarmed
Page 15
Key code keypad
Reason 1 9
Reason 10
Reason 0
Reason 11
Table 14: Pressed key interpretation
control" is set, the press of
programming cards
# (hash)
(cards
Advertisement
Table of Contents
