4.2 LED indicators description
D1
D2
0
0
Pic. 3: LED indicators description
Continuously lit – RED
Flashing with 4 s period – RED
D1
Fast switching – RED / GREEN
Single flash – GREEN
Lit - GREEN
Flashing / lit – YELLOW
D2
Short flashing with 1s p.– YELLOW
Continuously lit – GREEN
Continuously lit – RED
D3
Continuously lit – YELLOW
4.3 Standard connection
Input 1
Input 2
Output 1
Output 2
I/O Port
D3
0
Door contact, active when door closed; REX button
Request to exit button or handle contact; Tamper; Disabling function;
active on 0 VDC
Door lock control (relay)
Alarm status signaling (relay)
External tamper (Standard operating mode)
External reader buzzer control (op. mode with entry reader)
Input for IDS status monitoring (op. mode standard with IDS control)
Disabling function
Reading synchronization: MASTER / SLAVE mode
Page 7
Communication status,
D1
ID media reading
Door
D2
programming mode
D3
IDS monitoring
Table 7: LED indicators
Online operating mode
Offline operating mode
Address setting mode; RS 485 testing
ID media reading
Indicating door lock release
Programming mode, PIN changing mode
Indicating door lock release (optional)
Indicating IDS disarmed status
Indicating IDS armed status
Indicating IDS arming / disarming status
Table 8: LED indicators description
Table 9: Standard connection
lock
status,