Table of Contents
Advertisement
3.2 Technical features
Supply voltage
Current demand
Keypad layout
ID technology,
typical reading range
Real-time clock
Memory
Inputs
Outputs
I/O Port
Indicators
Tamper protection
Communication interface
Alternative data input/output
3.3 Special accessories
WIO 22
3.4 Using WIO 22 module for remote output control
The
WIO 22
remote control
of APS system reader modules. The door open or other functions can be controlled from the
module located inside the secure area, while the reader module can be located in the non-
secure area.
The module is controlled by
standard operating mode. The module must be paired with appropriate reader module before
use.
The
WIO 22
module is always required when the reader module is used for
Typical
Maximal
EM Marin
Cards
Events
Time schedules
st
1
input
nd
2
input
Door lock
Alarm
External device
Opening the cover
Against tearing-off
51901200
Remote control module, 2x relay
WIEGAND
relay module is designated for secure output control
WIEGAND
signal directly from the reader module working in
Page 5
8 ÷ 28 VDC
70 mA
120 mA
Numeric keypad, 12 keys
5 cm (with ISO card)
Yes, with 24 hrs. back-up
2,000 ID, 2 programming cards
3,400
64
Logical potential-free contact
Logical potential-free contact
Relay NC/NO, 2A/24V
Relay NC/NO, 2A/24V
Ext. tamper / ext. reader buzzer control /
input for IDS status monitoring / module
disable function / reading synchronization
MASTER/SLAVE modes
3x LED
1x PIEZO
Opto-electronic
RS 485
WIEGAND (configurable)
Table 2: Technical features
Table 3: Special accessories
IDS
control.
Advertisement
Table of Contents
