TECHFASS APS mini MREP 78 Series User Manual page 16

6.8.1 Inserting cards (codes) into the reader's memory
Follow these steps for inserting cards into the reader module's memory:
Step 1
Read the programming card
(or enter the programming
code) for inserting: the reader
goes into programming
mode.
6.8.2 Deleting cards (codes) from the reader's memory
For deleting the cards from the reader module's memory use following steps:
Step 1
Read the programming card
(or enter the programming
code) for deleting: the reader
goes into programming
mode.
Step 2
One by one, read the cards
(enter user codes) which are
to be granted access.
Pic.4 a): Inserting cards (codes)
Step 2
One by one, read the cards
(enter user codes) which are
to have their access revoked.
Pic.4 b): Deleting cards (codes)
Page 16
Step 3
About 15 seconds
inserting the last card (code)
the reader module goes
back into standard operating
mode.
Step 3
About 15 seconds
deleting the last card (code)
the reader module goes
back into standard operating
mode.
after
after