Table of Contents
Advertisement
6.3.4 Antipassback alarm
The
Antipassback alarm
or when the ID is blocked by a
6.3.5 ID with Alarm flag alarm, Duress PIN alarm
ID with Alarm flag alarm
occurs when a user uses
6.3.6 Reading ID during alarm state
Reading an ID doesn't affect the alarm state, reading a valid ID only terminates the acoustic
alarm announcement followed by "Door Open" function. Reading an invalid ID only interrupts
the acoustic announcement of the alarm state while signalizing "Invalid ID".
6.4 Standard operating modes
The reader module can be in either
functionality is identical in both operating modes; the events archive is read from the reader
module's memory when the module goes online.
in either online or offline mode), the module goes into programming mode.
6.5 Read ID media format
6.5.1 EM Marin ID media format
The EM Marin ID media format can be changed into selected 24, 32 or 40 bits length of ID
code. The default length is 40 bits. This setting is only used when unifying of the ID media
codes length is required – in combined systems with WIEGAND output readers with a fixed
WIEGAND data format IDs (more information in
http://www.techfass.cz/files/m_aps_miniplus_reader_en.pdf).
6.6 Wiegand interface configuration (operating mode)
6.6.1 Standard operating mode
In the
Standard operating mode
relay
module. The
WIO 22
control and alarm outputs.
When the reader module operates in the standard operating mode, the I/O Port (tab. 6) is
used as an input for monitoring an external device tamper status.
6.6.2 Wiegand input (entry reader)
When using the standard operating mode, the module can be configured for controlling the
door from both sides
In the
entry reader mode
the
WIEGAND interface
operates standardly, the reason codes equal zero (or the key code pressed when the reader
keypad configuration is used).
is raised when an ID is read during the
Zone
APB.
occurs when an ID with the Alarm flag is read.
duress PIN code
online
the interface can be used for remote control of the
module outputs copy the status of the reader module door lock
(entry reader
mode).
an identification event raised at an external reader connected via
acquires a
reason code
Page 12
Time APB
for identification.
operating mode. The module's
or
offline
.
When a programming card is read (while
APS Reader
255; at the same time the reader module
counter is running
Duress PIN alarm
user's guide available at
WIO 22
Advertisement
Table of Contents
