Table of Contents
Advertisement
ID media technology
EM Marin
Two long beeps and the red LED lit feature powering up the module. The green LED blink
indicates an ID reading.
Individual signals function in
Input 1
Input 2
Output 1 (relay)
Key codes sent in
WIEGAND output
Key pressed
1 9 (digits)
# (hash)
0
(star)
Since the
FW version 5.09
implemented, enabling to
offers the
Wiegand data interface synchronization
6.7 Keypad function
The keypad function setting can be set to one of the following options:
•
– this option is used when the keypad is used for entering a code of reason
Key code
to exit.
•
– with this option selected the keypad is used for entering PIN codes, a correct PIN
PIN
is required for valid identification when this option is selected
If the
"Suppress PIN request according to a time
entering is not requested when the used time schedule is valid.
•
– this option enables entering a code at the keypad which is used as a user's read
ID
ID medium; the time for locking up the keypad when an unknown ID is entered 5 times
in a row can be set there as well, the setting range is from 0 to 2550s with a 10s step.
Table 14 defines the interpretation of keys pressed at the keypad of
modules
according to the program configuration of the keypad function.
Available configuration of the WIEGAND output format
26bit, 32bit, 42bit, 44bit
Table 11: ID media format in WIEGAND operating mode
WIEGAND output
Beeper control (0 V active)
Yellow LED control (0 V active)
Tamper signaling; it follows the alarm state of tamper sensors
(tamper signal = relay switched on)
Table 12: Signal function in WIEGAND operating mode
operating mode are described in table 13.
Keypad configuration
PIN / ID keypad
Codes 1 9
Code 11
Code 0
Code 10
Table 13: Key codes sent in WIEGAND output operating mode
the reading synchronization of a
cancel the mutual disturbance
Page 14
operating mode is described in table 12.
Key code keypad
Code 10
Code 0
couple of TECHFASS readers
of the modules. The reader module
in
MASTER
mode.
schedule" function is set, the PIN code
3)
MREP 78 reader
is
Advertisement
Table of Contents
