Standard Operating Modes; Read Id Media Format; Wiegand Interface Configuration - TECHFASS APS mini Plus MREM 65 Series User Manual

6.3.4 Antipassback alarm
The Antipassback alarm
or when the ID is blocked by a
6.3.5 ID with Alarm flag alarm
ID with Alarm flag alarm
6.3.6 Reading ID during alarm state
Reading an ID doesn't affect the alarm state, reading a valid ID only terminates the acoustic
alarm announcement followed by "Door Open" function. Reading an invalid ID only interrupts
the acoustic announcement of the alarm state while signalizing "Invalid ID".

6.4 Standard operating modes

The reader module can be in either
functionality is identical in both operating modes; the events archive is read from the reader
module's memory when the module goes online
either online or offline mode), the module goes into programming mode.

6.5 Read ID media format

6.5.1 EM Marin ID media format
The EM Marin ID media format can be changed into selected 24, 32 or 40 bits length of ID
code. The default length is 40 bits. This setting is only used when unifying of the ID media
codes length is required – in combined systems with WIEGAND output readers with a fixed
WIEGAND data format IDs (more information in
http://www.techfass.cz/files/m_aps_miniplus_reader_en.pdf).

6.6 Wiegand interface configuration

6.6.1 Standard operating mode
This is the module default operating mode. The Wiegand interface is used for controlling the
WIO 22 module in this configuration. When the reader module operates in the standard
operating mode, the I/O Port (tab. 5) is used as an input for monitoring an external device
tamper status.
is raised when an ID is read during the
Zone APB.
occurs when an ID with the Alarm flag is read.
online
Page 11
Time APB
operating mode. The module's
or offline
.
When a programming card is read (while in
user's guide available at
APS Reader
counter is running