Periodic Service - Kane AUTO600 Manual

7.2 Periodic Service

CAUTION!
Repair and service of this instrument is to be performed by qualified
personnel only. Improper repair or service could result in physical
degradation of the instrument. This could alter the protection from
personal injury this meter provides to the operator. Perform only those
maintenance tasks that you are qualified to do.
7.3 Cleaning
CAUTION!
Periodically clean your instrument case using a damp cloth. DO NOT use
abrasive, flammable liquids, cleaning solvents, or strong detergents as
they may damage the finish, impair safety, or affect the reliability of the
structural components.
7:4 Regular Maintenance
If the readings are erratic or if the AUTO600 will not zero it may be
necessary to clean the lenses and also the measurement tube. Follow
the procedure below observing the cautions.
The AUTO600 may be returned to the Kane Service Centre if preferred.
CAUTION!
• Some internal parts of the AUTO600 are heated to temperatures in
excess of 70
• Switch the AUTO600 off for 30 minutes or so to allow it to cool
before touching any internal parts.
• Beware of fine soot particles in the measurement tube and avoid
inhaling while cleaning. These particles may cause irritation if
breathed in.
o
C.
Page 18