Modes; Inverter Modes - YASKAWA Varispeed E7 Instruction Manual And Parameter Description

Modes

This section describes the Inverter's modes and switching between modes.

Inverter Modes

The Inverter's user constants and monitoring functions are organized in groups called modes that make it eas-
ier to read and set user constants.The Inverter is equipped with 5 modes.
The 5 modes and their primary functions are shown in the
Drive mode
Quick programming mode
Advanced programming mode
Verify mode
Autotuning mode
-4
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Mode
The Inverter can be run in this mode.
Use this mode when monitoring values such as frequency references or output cur-
rent, displaying fault information, or displaying the fault history.
Use this mode to read and set the basic user constants to operate the Inverter.
Use this mode to reference and set all user constants.
Use this mode to read/set user constants that have been changed from their factory-
set values.
Use this mode when running a motor with unknown motor constants. During Auto-
tuning the line-to-line resistance is measured and set automatically.
Table 3.2.
Table 3.2 Modes
Primary function(s)