Display; A Tape Motion Status - Alesis AI-2 Reference Manual

6.3 DISPLAY

The AI-2 display is used to indicate status information such as
sample rate and time code information, and in SETUP mode to
enter AI-2 operational parameters. The display is also used to
show context sensitive warning messages and system error
messages.
The upper line normally indicates the selected AI-2 time code
register, and the lower line the current time code value. In setup,
the display indicates the mode and menu on the upper line and the
submenu and selected option on the lower line.

6.3A Tape Motion Status

Except when in setup mode, the transport status is always indi-
cated by the first character in the lower line of the display. The
following designations are used.
0 0 : 0 0 : 0 0 : 0 0
0 0 : 0 0 : 0 0 : 0 0
> 0 0 : 0 0 : 0 0 : 0 0
L 0 0 : 0 0 : 0 0 : 0 0
»
0 0 : 0 0 : 0 0 : 0 0
«
0 0 : 0 0 : 0 0 : 0 0
R 0 0 : 0 0 : 0 0 : 0 0
r 0 0 : 0 0 : 0 0 : 0 0
G 0 0 : 0 0 : 0 0 : 0 0
E 0 0 : 0 0 : 0 0 : 0 0
ADAT transports in Stop.
ADAT transports are Disengaged.
ADAT transports in Play.
ADAT transports in Lock.
ADAT transports in Fast Forward.
ADAT transports in Rewind.
ADAT transports in Record.
ADAT transports in Rehearse.
ADAT transports in Search.
ADAT tapes are Ejected.
46