Interfacing To The Brc - Alesis AI-2 Reference Manual

3.2 INTERFACING TO THE BRC

REMOTE CONTROL
The AI-2 can be used to control one or more ADATs through the
BRC, this allows an "ADAT system" to be connected to a machine
control system or video editing system. The AI-2 communicates
with the control system and the BRC which can be used to provide
such features as track enable buttons and MIDI song tempo
mapping. The basic connections are shown below.
Connect the cables between the AI-2 BRC connector section and the
BRC. Two standard MIDI cables from AI-2 MIDI IN to BRC MIDI
OUT, and from AI-2 MIDI OUT to BRC MIDI IN. A standard BNC to
BNC coaxial cable from AI-2 W/C OUT to BRC 48 KHz IN and a
mono or stereo jack plug to jack plug cable from AI-2 GEN OUT to
the BRC SMPTE input. Connect the BRC REMOTE OUT TO ADAT
connector to the SYNC IN on the first ADAT transport.
CONTROLLING THE BRC
ALESIS AI-2
REFERENCE
ALESIS CORPORATION, LOS ANGELES
S/N RDR IN W/C IN VID IN
POWER CONFIG
TimeLine Vista, Inc.
MANUFACTURED BY MADE IN USA
Time Code
ALESIS BRC
PUNCH IN/OUT LOCATE/PLAY SMPTE IN SMPTE OUT 48 kHz IN
MASTER ADAT
–10 dBV ANALOG INPUTS
1 2 3 4 5 6 7
–10 dBV ANALOG OUTPUTS
1 2 3 4 5 6 7
FOOTSWITCHES SYNC METER BRIDGE
LOCATE/PLAY PUNCH IN OUT
LRC REMOTE IN/OUT
Sync In Sync Out
CONTROL
IN
EDITOR LYNX-2 / MICRO LYNX
CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Word Clock
MIDI
48 kHz OUT VIDEO SYNC IN MIDI IN MIDI OUT REMOTE OUT TO ADAT
+4 dBu ANALOG OPTICAL
DIGITAL DIGITAL
8
INPUT OUTPUT
INPUT
8
POWER REQUIREMENTS
90-260 VAC
OUTPUT
50-60 Hz
50 WATTS MAX
16
BRC
MIDI MIDI
OUT IN OUT THRU
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPTERATIONS.
MIDI
SLAVE ADAT
–10 dBV ANALOG INPUTS
1 2 3 4 5 6 7 8
–10 dBV ANALOG OUTPUTS
1 2 3 4 5 6 7 8
FOOTSWITCHES SYNC METER BRIDGE
LOCATE/PLAY PUNCH IN OUT
LRC REMOTE IN/OUT
Sync In Sync Out
ADAT
GEN OUT
W/C OUT SYNC OUT
I
O
90-250 VAC 50-60 Hz POWER ON/OFF
+4 dBu ANALOG OPTICAL
DIGITAL DIGITAL
INPUT OUTPUT
INPUT
POWER REQUIREMENTS
90-260 VAC
OUTPUT
50-60 Hz
50 WATTS MAX
AI2011A