8.3A Tape Status Messages
•
All Wr Protected. A record command cannot be executed,
because all ADAT tapes are write protected.
•
Ejected. A read data command cannot be executed because
the tape in the first ADAT machine is ejected or a save data
command cannot be executed because all ADAT tapes are
ejected.
•
Reading Tape. ADAT tape header data being read from first
ADAT transport.
•
Read/Sav In Prog. A command has been received when a
read or save data operation is already in progress.
•
Saving To Tape. ADAT header data is being saved to all ADAT
tapes.
•
Tape Read Abort. An unsuccessful ADAT tape read operation
has been aborted.
•
Tape Read Err. A tape read operation timed out or an error
was encountered during the data transfer. The data in the AI-2
may be incorrect.
•
Tape Read Done. A successful ADAT tape read operation has
been completed.
•
Tape Read Wait. A read tape operation has been requested and
the master ADAT transport is rewinding to the data header.
•
Tape Save Abort. An unsuccessful save tape operation has
been aborted.
•
Tape Save Done. A successful ADAT tape save operation has
been completed.
•
Tape Save Err. A tape save operation timed out or an error has
been encountered during the data transfer. The data saved on the
ADAT tapes may be incorrect.
•
Tape Save Wait. A save tape operation has been requested
and the ADAT transports are rewinding to the data header.
•
Unformatted. The tape in the first ADAT machine is
unformatted.
78