Alesis AI-2 Reference Manual page 66

Selection. Used to determine the track control method. The
•
selections are editor control, Lynx control (which is also used for
MMC track control), and local at the front panel of the ADAT
transports.
Mapping. The mapping option determines the operation of the
•
following map to, track assignment selection. Single tracks,
pairs of tracks or groups of four or eight can be selected. When
using Da1-Da4 track enables from the editor the AI-2 automati-
cally maps these to A1-A4
Map To. Used to select the track or groups of tracks that are
•
mapped to the editor record enables. The track allocation
method is determined by the mapping option selection.
Record Source. If the track select mapping control is set to
•
local then the record source selection determines the editor
track enable for issuing the record command to the ADATs.
This allows a single track enable to put multiple tracks selected
on the front panel of the ADAT transports into record.
61