Alesis AI-2 Reference Manual page 24

An external digital audio word clock can be connected to the
reference W/C IN connector. The same precautions apply as for
the video editor interface, the word clock and synchronizer system
must both be locked to the same reference signal. For example, if
the synchronizer system is referenced to video sync, then the word
clock must also be referenced to video sync.
LYNX-2 OR MICRO LYNX INTERFACE
ALESIS AI-2
REFERENCE
ALESIS CORPORATION, LOS ANGELES
S/N RDR IN W/C IN VID IN
POWER CONFIG
TimeLine Vista, Inc.
MANUFACTURED BY MADE IN USA
CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
(EXT WORD
CLOCK)
VIDEO
REFERENCE (OPT)
LYNX-2
RESHAPE GEN OUT PILOT IN PILOT OUT
TC IN
TRANSPORT
TC RDR
In
TC RDR
In
TIME CODE
RDR 1 RDR 2
S/N
MADE IN USA
POWER VIDEO REF
VIDEO
REF (OPT)
When the Lynx-2 or Micro Lynx is connected correctly the
CONTROL LED on the front panel of the AI-2 should be illuminated,
to indicate that valid communication is occurring between the units.
If the LED does not light (no communications) or is flashing
(communication taking place, but with errors), then recheck the
cable connections.
CONTROL
MIDI
IN
EDITOR LYNX-2 / MICRO LYNX
AUX
EXT VIDEO VITC MAC
RS422
MIDI
IN OUT THRU/OUT I/F MAC
OUT AUX IN AUX OUT
KEYBOARD
TRANSPORT 1 TRANSPORT 2
19
BRC
MIDI
OUT IN OUT THRU GEN OUT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPTERATIONS.
ALESIS ADAT
–10 dBV ANALOG INPUTS +4 dBu ANALOG
1 2 3 4 5 6 7 8
–10 dBV ANALOG OUTPUTS
1 2 3 4 5 6 7 8
FOOTSWITCHES SYNC METER BRIDGE
LOCATE/PLAY PUNCH IN OUT
LRC REMOTE IN/OUT
Sync In
MICRO LYNX
COMPUTER AUDIO CLOCK GENERATOR
SYSTEM TALLY
RS232/422 AES/EBU
O.S. OUT WORD OUT CLOCK IN
IN THRU
VIDEO OUT RDR 3
TRANSPORT 3
VITC
ADAT
W/C OUT SYNC OUT
OPTICAL
DIGITAL DIGITAL
INPUT OUTPUT
INPUT
POWER REQUIREMENTS
90-260 VAC
OUTPUT
50-60 Hz
50 WATTS MAX
AI2023A