Table of Contents
Advertisement
manual. In Setup mode, the function of the front panel keys
changes, as indicated by the gray italic legends to MENU, LAST,
NEXT, DOWN and UP.
The SETUP key toggles in and out of Setup mode, which can be
entered at any time. Press the SETUP key to enter Setup mode
and press the key again to exit Setup mode and return to the
normal display.
The top level menu structure is arranged alphabetically and in most
cases the submenus are also arranged alphabetically, this however
was not strictly adhered to if a more obvious or logical order was
deemed necessary to simplify operation.
The display in all menus except for the Cue menu is structured so
that the upper line indicates, Setup: followed by "Menu name", and
the lower line indicates the "submenu " and "selected value or
option." For example, sample rate selection in the Reference menu
is indicated as follows:
Because the Cue menu contains time codes, the submenu name is
on the top line and cue number and time code are on the lower line.
The MENU key is used to step through the top level menu list, and
the LAST and NEXT keys are used to step through submenus. The
DOWN and UP keys are used to adjust the submenu options or
values. In some cases to simplify operation, holding the DOWN or
UP keys causes the value to automatically scroll.
S e t u p :
R e f e r e n c e
S / R a t e :
4 8 . 0 0 0 K
S e t u p :
C u e
1
0 0 : 0 0 : 0 0 : 0 0
37
S t a r t
Hide quick links:
Advertisement
Table of Contents
