Alesis Photon X25 Driver Installation Manual

Alesis Photon X25 Driver Installation Manual

Usb midi controller and stereo audio interface
Hide thumbs Also See for Photon X25:

Advertisement

USB MIDI Controller and Stereo Audio Interface
Driver Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Photon X25 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alesis Photon X25

  • Page 1 USB MIDI Controller and Stereo Audio Interface Driver Installation Guide...
  • Page 2 Plug-and-Play Connection to a Computer Driver installation is not required on Windows XP since the Photon is supported by the default audio drivers, but we highly recommend installing the Alesis audio drivers. Our drivers will yield significantly lower latency and better performance.
  • Page 3 1. Using the Keyboard with your MIDI Start off simply. Once you’re plugged in and powered up, go to your sound module or software application and set the incoming MIDI channel. If you’re using software, you will probably need to configure it to use the Photon or “USB”...
  • Page 4 3. Audio Recording and Playback To record, connect the OUTPUT from an audio device to the AUDIO IN jacks of the Photon X 25. Use balanced (TRS) or unbalanced (TS) ¼” cables. In your audio software, enable input from the Photon X 25. If your software allows it, adjust the sample rate.

Table of Contents