Table of Contents
Advertisement
•
Wr Protected. A command cannot be executed because the
write protect tab has been removed from the tape.
8.3B System Status Messages
•
ADAT Unavailable. A tape operation has been requested and
the ADAT transport is not available.
•
ADAT Version Err. The AI-2 has detected a version of ADAT
software that is earlier than V3.05. This does not prevent
operation, but synchronization performance may not be as good
as it could be.
•
All Safe. The AI-2 has received a record command and track
All Safe is set to on.
•
Clearing Mem. The AI-2 memory is being cleared by a power
up ram clear command.
•
Code Changed. The AI-2 time code type has changed.
•
Format Extend. An ADAT format extend is occurring as part of
an assemble edit operation.
•
Fps Changed. The AI-2 system frame rate has changed.
•
Generator Err. The AI-2 time code output has lost lock.
•
Ignoring Data. A data read or save operation has been
aborted, the AI-2 will ignore any data that is still being
transferred.
•
Loc Out of Range. The AI2 has received a locate command that
would cause the ADAT tape to wind beyond the physical tape
limits.
•
MIDI Read. The AI-2 is reading MIDI data from an external
MIDI device.
•
MIDI Read Abort. An unsuccessful read MIDI data operation
has been aborted.
•
MIDI Read Err. An error has been encountered during a MIDI
data read operation or the read operation timed out. The data in
the AI-2 may be incorrect.
•
MIDI Read Done. A successful read MIDI data operation has
been completed.
79
Hide quick links:
Advertisement
Table of Contents
