Table of Contents
Advertisement
Digital In. Used to switch the audio input of all connected
•
ADAT transports to the fiber optic digital input.
Track Delay. Used to turn track delays on or off, if delays have
•
been read from the ADAT tape header. Track delays can not be
entered from the AI-2 front panel.
6.5B Commands Menu
The commands menu is used to set default command operation
and to issue system commands. The read and write data com-
mands are selected in this menu. To perform a data read or save
operation, select a command, press the SETUP key to exit setup
mode and then press the STORE key to confirm the command.
Menu
COMMANDS
Data. Used to select a data read or save operation. The menu
•
defaults to Abort, this is used to terminate a data transfer
operation in progress. The special case, clear header, erases
the tape header information in the AI-2 so that information read
from a previous tape will not be inadvertantly stored to a new
tape.
Read Tape. If set to AUTO will always prompt the user to read
•
data from the tape when the ADAT transports are loaded.
Read SysEx. If set to AUTO MIDI SysEx information received
•
at the MIDI IN port will automatically overwrite the data header.
Submenu
Option
Data
Save SysEx
Read SysEx
Save Tape
Read Tape
Clr Header
Abort
Read Tape:
Auto
Off
Read SysEx:
Auto
Off
51
Description
ADAT data read and save selection.
See special operating mode #1.
Default.
Always prompt to read ADAT tape
header when new tape detected
(default).
Allow MIDI SysEx to automatically
overwrite AI-2 header information.
Default.
Hide quick links:
Advertisement
Table of Contents
