Table of Contents
Advertisement
3.5 TIME CODE CHASE INTERFACE
The AI-2 has a high resolution bi-directional time code reader that
has been specifically designed for time code chase applications.
The reader can read all time code types, at any rate, including
discontinuous high speed code. The AI-2 thereby ensures that
ADAT tape recorders can be integrated into a system when only a
time code feed is available. The AI-2 reader has a wide input range
and an adjustable flywheel option to cater for bad time code. The
reader input can also be selected as the system reference when it
is necessary for the ADAT to lock to unreferenced or off speed
code.
Connect the RDR IN connector in the reference section of the AI-2
rear panel to the reference or master time code with a standard
mono or stereo jack plug cable.
In time code chase mode an optional video sync or word clock
reference may be connected. If an external reference is supplied,
the AI-2 will resolve the ADATs to the reference, while using the
time code input as a numerical reference only.
TIME CODE CHASE INTERFACE
ALESIS AI-2
REFERENCE
ALESIS CORPORATION, LOS ANGELES
S/N
RDR IN
W/C IN
VID IN
POWER
CONFIG
TimeLine Vista, Inc.
MANUFACTURED BY
MADE IN USA
TIME
CODE IN
(EXT WORD
CLOCK)
(VIDEO
REFERENCE)
Similar precautions apply, when using an external word clock, as
for the previous methods of operation. The word clock must be
locked to either the video reference, if used, or to the time code
which is being fed to the reader input.
CONTROL
IN
EDITOR
LYNX-2 / MICRO LYNX
CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
20
BRC
MIDI
MIDI
OUT
IN
OUT
THRU
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPTERATIONS.
ALESIS ADAT
–10 dBV ANALOG INPUTS
+4 dBu ANALOG
1
2
3
4
5
6
7
8
–10 dBV ANALOG OUTPUTS
1
2
3
4
5
6
7
8
FOOTSWITCHES
SYNC
METER BRIDGE
LOCATE/PLAY
PUNCH
IN
OUT
LRC REMOTE
IN/OUT
Sync In
ADAT
GEN OUT
W/C OUT
SYNC OUT
OPTICAL
DIGITAL
DIGITAL
INPUT
OUTPUT
INPUT
POWER REQUIREMENTS
90-260 VAC
OUTPUT
50-60 Hz
50 WATTS MAX
AI2012A
Hide quick links:
Advertisement
Table of Contents
