Processor; Effects Section Components; Program Selection Knob; Led Display - Alesis MULTIMIX 16 Reference Manual

Digital Effects Processor
3
Onboard your MultiMix USB2.0 is a powerful effects unit that has
100 preset programs. We offer a few tips on where to use these,
but don't limit yourself to our suggestions. We recommend that
you experiment with these effects to get a good feel for how they
can improve your mixes

Effects Section Components

Program Selection Knob

You can use this knob to assign one of 100 effect programs to
your mix. Turning the knob to the right increments the program
number, and turning it to the left decrements the program number.
You can control the level of the effect for each channel via the
channel's AUX B knob. You must PRESS the effect knob to
activate the selected effect.

LED Display

This display shows you the number of the current program.

CLIP Indicator

When lit, this LED tells you that there is a signal clip at the
internal effects input. This means that you should reduce the signal
via the EFFECTS / AUX RET B LEVEL control.

SIG Indicator

When lit, this LED indicates that the effects processor is receiving
a signal.

Effect Descriptions

HALL

This type of reverb simulates the ambience of a grand concert hall.

ROOM

This type of reverb reproduces the more intimate ambiance of
natural room acoustics.

PLATE

These are simulations of metal plate reverbs, as used on classic
recordings from the '70s and '80s.

CHAMBER

These are simulations of the reverb created by artificial echo
chambers, as used on classic recordings of the '50s and '60s.
21