Table of Contents
Advertisement
On the AI-2 front panel, the LTC LED will illuminate when valid time
code is being received at the rear panel reader input. If the LED
does not light or is flickering then check the time code cable or the
output level of the time code source.
3.6 EXTERNAL MIDI INTERFACING MIDI
MACHINE CONTROL
The AI-2 can be controlled from a MIDI controller or software
program that generates MIDI Machine Control (MMC) commands.
MIDI Machine Control commands and responses will operate
simultaneously with either the Editor or Lynx-2/Micro Lynx
synchronizer controllers. The AI-2 permits the seamless integration
of ADAT transports into the electronic music studio as MIDI
programs designed to control the BRC or ADAT machines can be
operated without configuring the system.
MIDI Machine Control commands are fed to the AI-2 using a
standard MIDI cable to the MIDI IN connector in the control section
of the AI-2 rear panel. MIDI Machine Control responses will appear
at the MIDI OUT connector. The MIDI out connector also optionally
includes MIDI time code.
EXTERNAL MIDI INTERFACING MIDI MACHINE CONTROL
ALESIS AI-2
REFERENCE
ALESIS CORPORATION, LOS ANGELES
S/N
RDR IN
W/C IN
VID IN
POWER
CONFIG
TimeLine Vista, Inc.
MANUFACTURED BY
MADE IN USA
EDITOR
LYNX-2 / MICRO LYNX
MMC COMMANDS
1
Operation in Parallel with either RS422 or
Lynx-2 / Micro Lynx Control.
CONTROL
IN
EDITOR
LYNX-2 / MICRO LYNX
CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1
21
BRC
MIDI
MIDI
OUT
IN
OUT
THRU
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPTERATIONS.
MMC RESPONSES
(Optionally includes
MIDI Time Code)
ALESIS ADAT
–10 dBV ANALOG INPUTS
1
2
3
4
5
6
7
8
–10 dBV ANALOG OUTPUTS
1
2
3
4
5
6
7
8
FOOTSWITCHES
SYNC
METER BRIDGE
LOCATE/PLAY
PUNCH
IN
OUT
LRC REMOTE
IN/OUT
Sync In
ADAT
GEN OUT
W/C OUT
SYNC OUT
+4 dBu ANALOG
OPTICAL
DIGITAL
DIGITAL
INPUT
OUTPUT
INPUT
POWER REQUIREMENTS
90-260 VAC
OUTPUT
50-60 Hz
50 WATTS MAX
AI2009A
Hide quick links:
Advertisement
Table of Contents
