•
MIDI Read Wait. A read MIDI data operation has been
requested and the AI-2 is waiting for data.
•
MIDI Save. MIDI data is being saved to an external MIDI
device.
•
MIDI Save Abort. An unsuccessful save MIDI data operation
has been aborted.
•
MIDI Save Done. A successful save MIDI data operation has
been completed.
•
No Data. A read operation has found no data to transfer.
•
Reader Lost Lock. Time code is selected as the system refer-
ence, but due to interruption, drop outs or instability, the AI-2
has lost lock.
•
Reader Ref Error. The time code being read at the reader
input is not locked to the AI-2 system reference.
•
Setup Read Only. Changing parameters in setup mode has
been inhibited by a rear panel dip switch selection.
•
Rec Not Locked. A record command was issued to the ADAT
machine chain before all ADAT transports were locked.
•
Reference Err. A generic message indicating that a reference
related problem has occurred. This message is displayed each
time any one of the specific reference lock messages is added
to the error message stack.
•
Ref Lost Lock. The internal reference or external synchronizer
reference has lost lock.
•
Ref Not Present. Selected AI-2 reference is not present.
•
Ref Src Changed. The AI-2 reference source has changed.
•
Reh Not Locked. A rehearse command was issued to the
ADAT machine chain before all ADAT transports were locked.
•
S/R Out of Range. The word clock signal connected to the AI-2
has exceeded the ADAT range.
•
S/R Changed. The AI-2 sample rate has changed.
•
Store to Confirm. Prompt for confirming commands that have
a potential data loss.
80