Table of Contents
Advertisement
and any current session information such as offsets back to the
ADAT tape header. The save command requires confirmation
with the STORE key.
•
ONLINE. Used to allow the AI-2 to be controlled externally. The
ONLINE key is a toggle that permits the selected control source,
editor, synchronizer system, time code chase or MMC to take
control of the ADAT transports and receive status from the AI-2.
•
CAPTURE = STORE + SET/HOLD. Used to capture and
automatically load an offset. Press and hold STORE key and
then press SET/HOLD key. Used in chase mode to calculate
the difference between the current reader input (RDR IN)
position and the ADAT position and automatically enter it in the
AI-2 offset register. Can also be used to calculate the offset
between LTC recorded on an ADAT audio track and the ADAT
tape position.
6.4B Setup Operation
In setup, the keys have the following functions.
SETUP
MENU
In setup mode, the front panel keys are used to select and adjust
AI-2 menu options and parameters that are arranged in a tree style
menu structure. The MENU key is used to access the top level
categories, the LAST and NEXT keys are used to step through
submenus and the DOWN and UP keys used to select options or
alter values.
•
SETUP. Toggles in and out of setup mode as described in
normal operation above.
•
LAST. Moves to the previous submenu entry.
•
NEXT. Moves to the next submenu entry.
•
MENU. Steps to the next high level menu. The MENU key
rotates round the setup menus.
LAST
DOWN
––––––––––
CLEAR
–
48
NEXT
UP
––––––––––
–
Hide quick links:
Advertisement
Table of Contents
