Table of Contents
Advertisement
5500 Series Power Operator - PUSH SIDE Installation
Operation:
•
Door is normally closed and latched .
•
Activating switch will cut power to mag
lock and door will automatically open .
•
Door will close after hold open time
delay has elapsed .
•
Door will unlock during power failure .
NOTE:
1.
Power input to Door Operator Unit is
at HOT/COM on terminal strip shown
120VAC 60Hz.
2.
Unit Relay Rating: 30VDC @ 1A or
125VAC @ .5A
3.
Door must be visible by person
operating activation switch(s).
Switch(s) to comply with ANSI/BHMA
standards.
Jumper Settings:
Place jumper to upper position for normally
closed operation or to lower position for
normally open operation .
Operation:
•
Door is normally closed and latched .
•
Activating switch will unlock electric
strike and door will automatically open .
•
Door will close after hold open time
delay has elapsed .
•
For Fail Secure Strike - door will remain
locked during power failure .
•
For Fail Safe Strike - door will remain
unlocked during power failure .
NOTE:
1.
Power input to Door Operator Unit is
at HOT/COM on terminal strip shown
120VAC 60Hz.
2.
Unit Relay Rating for strike interface:
30VDC @ 1A or 125VAC @ .5A
3.
Door must be visible by person
operating activation switch(s).
Switch(s) to comply with ANSI/BHMA
standards.
Jumper Settings:
Place jumper to upper position for normally
closed operation or to lower position for
normally open operation .
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9355-0007-020 Rev 1 03/21
Fail Safe Electromagnetic Lock 24VDC Wiring
Fail Secure/Fail Safe Electric Strike Wiring
HOT
COM
A1
A2
R1
R2
Approved 2021-04-16
HOT
COM
A1
A2
R1
R2
13
Advertisement
Table of Contents
