Assa Abloy Norton 5500 Series Installation Instructions Manual

5500 Series Power Operator
PULL Side Installation Instructions
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
5510 Right Hand
(Wiring not shown)
Door Closer
On/Off Switch
120VAC Electrical Connections,
Activation Inputs, Fuse
Tools Needed
#16 12-24
Wrench
Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9355-0001-020 Rev 1 08/20
Backplate
Motor Assembly
Door Open/Closed
Position Magnets
Track End Cap (2)
3/32
3 16 / "
Hex Wrench
Pour la version francaise voir www.nortondoorcontrols.com.
READ AND FOLLOW ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Inverter
Main Arm
7110-1A
Supplied Fasteners
Surface Wiring
Conduit Bracket
1/8"
Screws
4x
Hex Wrench
Cover (5500CVR)
Slide Track
(7100-1T)
Track Cover
6x
Cover
#8-32 x 1/4"
2x
Track
Main Arm
Operator
#12 x 1-3/4" #1 x -3/4"
Slide Assembly
4x 4x
Operator
4 2