Clear Pppoe Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clear pppoe <interface id>
Use the clear pppoe command to terminate the current PPPoE client session and cause the AOS to attempt
to re-establish the session.
Syntax Description
<interface id>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Usage Examples
The following example ends the current PPPoE client session for ppp 1:
>enable
#clear pppoe 1
61200990L1-35E
Specifies the PPP interface ID number to clear.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
65