Cli Introduction; Accessing The Cli From Your Pc - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
REFERENCE GUIDE INTRODUCTION
This manual provides information about the commands that are available with all of the NetVanta Series
units.
This manual provides information about the commands that are available with NetVanta 5000 Series units.
For a list of all of the commands available through the CLI, see 61950860L1-35L (All Products).
If you are new to the ADTRAN Operating System's (AOS) Command Line Interface (CLI), take a few
moments to review the information provided in the section which follows (CLI Introduction).
If you are already familiar with the CLI and you need information on a specific command or group of
commands, proceed to Command Descriptions

CLI INTRODUCTION

This portion of the Command Reference Guide is designed to introduce you to the basic concepts and
strategies associated with using the AOS CLI.

Accessing the CLI from your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Understanding Command Security Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Understanding Configuration Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using CLI Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Performing Common CLI Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Understanding CLI Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Accessing the CLI from your PC
All products using the AOS are initially accessed by connecting a VT100 terminal (or terminal emulator)
to the CONSOLE port located on the rear panel of the unit using a standard DB-9 (male) to DB-9 (female)
serial cable. Configure the VT100 terminal or terminal emulation software to the following settings:
• 9600 baud
• 8 data bits
• No parity
• 1 stop bit
• No flow control
For more details on connecting to your unit, refer to the Quick Configuration Guides and
Quick Start Guides located on the ADTRAN OS Documentation CD provided with your
unit.
61200990L1-35E
on page 14 of this guide.
Copyright © 2005 ADTRAN
CLI Introduction
8